AnchorFlex™ End-Link for Longines Hydroconquest 39mm - Bathyscaphe Black
AnchorFlex™ End-Link for Longines Hydroconquest 39mm - Bathyscaphe Black

AnchorFlex™ End-Link for Longines Hydroconquest 39mm - Bathyscaphe Black

AnchorFLEX™ End-Link

For Longines Hydroconquest 39

A complete integrated rubber upgrade for the 2026 Longines HydroConquest 39mm, built with fitted stainless steel end links.

  • Made for the 2026 HydroConquest 39mm case (L3.779, 20mm lugs)
  • End links included for a clean integrated fit
  • Three-piece fit system: the right size is included in every pack
  • 316L stainless steel tang buckle included
Precio habitual$119
/
Los gastos de envío se calculan en la pantalla de pagos.

Material: AnchorFlex™ FKM rubber

Hardware: 316L stainless steel buckle and machined 316L stainless steel end links

Fitment: Made for the 2026 Longines HydroConquest 39mm (L3.779, 20mm lugs)

Attachment: End links and spring bars included. No original bracelet needed.

Length: 3-piece: 80mm buckle end and two hole ends (100mm / 120mm). Fits wrists from 5.25" to 8"

Important: These end links are fitted to the 2026 HydroConquest 39mm case.

Not compatible with the previous HydroConquest 39mm (L3.780, 19mm lugs).

AnchorFlex™ End-Link

Integrated look. Everyday simplicity.

Fits the 2026 Longines HydroConquest 39mm (L3.779). Machined 316L stainless steel end links and spring bars included.

A case-hugging integrated profile with the simplicity of a traditional buckle.

Check your watch before ordering

These end links are fitted to the shape of the new HydroConquest 39mm case, so it needs to be the right reference.

  • Fits the 2026 HydroConquest 39mm (L3.779 series), 20mm lug width
  • No bracelet needed. End links are included, so it fits whether or not your watch still has its original bracelet.
  • Does not fit the previous HydroConquest 39mm (L3.780 series, 19mm lugs)
  • Does not fit the HydroConquest 41mm or 43mm

The same Flagship rubber, shaped for an integrated fit

This is the AnchorFlex Flagship you already know, paired with fitted steel end links that sit flush against the case. There’s no clasp mechanism or extra hardware: just the strap, the end links, and a 316L buckle.

Your fit, right out of the box

There’s no size to choose at checkout. Every strap ships with three pieces: one buckle end and two hole ends. Pick the hole end that fits your wrist, and you’re done.

Why FKM

FKM fluoroelastomer is what we build every AnchorFlex strap from, and it’s why they last:

  • Holds up to UV, heat, and chemicals
  • Won’t crack, fade, or go brittle with age
  • Soft and pliable against the wrist, but structured enough to keep its shape
  • No sagging or collapse the way cheap rubber does

Flagship profile

  • Clean modern lines with a subtle taper
  • Substantial enough for daily wear, refined enough to dress up
  • Built to complement a tool watch, not overpower it

It’s the strap you leave on.

Specifications

Material AnchorFlex FKM rubber
End Links Machined 316L stainless steel, fitted to the 2026 HydroConquest 39mm (L3.779) case. Included.
Buckle 316L stainless steel tang buckle. Included.
Attachment Spring bars included
Length 3-piece: 80mm buckle end, two hole ends (100mm / 120mm)
Fits Wrists 5.25″–8″
Profile Slim and flexible for all-day wear

FAQs

Some end-link installs can feel tight at first because the thickness rubber strap at the end-link is maximized to ensure durability. There are a few ways to get it installed:

First, try gently wiggling and pushing the spring bar through until the spring bar pops into the opposite side of the end link. This can require some effort.

You can also squeeze the rubber portion of the strap into the end link between your thumb and index finger while pushing the spring bar into place. This helps compress the rubber slightly and gives the spring bar more room to seat properly.

If those techniques do not work, our premium 1.7mm spring bars can be used as an alternative. There is no downside to using them, but we recommend trying the first two installation methods first since the standard spring bars usually work once everything is seated correctly.

If you still have trouble, contact us and we can help troubleshoot the install.

AnchorFLEX™ straps are made from premium FKM rubber and have been third-party tested to be free of harmful fluorinated “forever chemicals” within the scope of the testing performed. We do not intentionally add PFAS-based coatings, surface treatments, or chemical finishes to our straps. Because FKM is a fluorinated rubber, we avoid vague blanket claims and clearly disclose the material. Customers who prefer to avoid fluorinated rubber entirely may prefer our nylon, sailcloth, leather, or other non-FKM strap options.


Visto recientemente