AnchorFLEX™ End-Link Deployant

For Omega Speedmaster

A complete integrated rubber upgrade for the Omega Speedmaster, built with fitted stainless steel end links.

End links included for a clean integrated fit
Durable FKM rubber with a soft, flexible feel
Designed for daily wear, travel, and water use

Shipping calculated at checkout.

Material: AnchorFLEX™ FKM rubber

Included Hardware: Custom-milled 316L stainless steel end links and premium 1.8mm spring bars

Clasp: 18mm Precision Deployant Clasp, 316L stainless steel (brushed/polished), available as an add-on on this page

Fitment: Made for the 42mm Omega Speedmaster Professional Moonwatch, calibre 1861 and 3861, in hesalite and sapphire sandwich versions

Not Compatible With: Speedmaster '57, Racing, Dark Side of the Moon and other ceramic models, 38mm, Reduced, or calibre 321 Moonwatch models

Length: 3-piece: two clasp ends (75mm / 100mm), 105mm hole end, designed to fit wrists from 5.25" to 8"

AnchorFlex™ End-Link Deployant

Integrated look. Deployant security.

Fits the Omega Speedmaster Professional Moonwatch 42mm with 20mm lugs. Machined 316L end links and spring bars included.

A case-hugging profile paired with our 18mm Precision Deployant Clasp. Developed on the Moonwatch sapphire sandwich, the included end links sit flush against the Speedmaster's case, so the strap follows the same lines as the original bracelet.

Check your watch before ordering

This fitment depends on the exact Speedmaster you own, not just the name on the dial.

Fits the Speedmaster Professional Moonwatch 42mm, calibre 1861 and 3861, in hesalite and sapphire sandwich versions
Does not fit the Speedmaster '57
Does not fit Speedmaster Racing models
Does not fit the Dark Side of the Moon or other ceramic Speedmasters
Does not fit the Speedmaster 38mm or Speedmaster Reduced
Does not fit the calibre 321 Moonwatch (39.7mm case)

The Flagship rubber, shaped for an integrated fit

This is the AnchorFlex Flagship you already know, cut to sit flush against the case and designed to close with a deployant clasp instead of a buckle.

Your fit, right out of the box

There's no size to choose at checkout. Every strap ships with three pieces: two clasp ends and one hole end. Pick the pairing that fits your wrist, then fine-tune at the clasp.

Precision Deployant Clasp

18mm, machined from 316L stainless steel
Brushed and polished finishing
Secure closure with no loose tail
Available as an add-on on this page

Why FKM

FKM fluoroelastomer is what we build every AnchorFlex strap from, and it's why they last:

Holds up to UV, heat, and chemicals
Won't crack, fade, or go brittle with age
Soft and pliable against the wrist, but structured enough to keep its shape
No sagging or collapse the way cheap rubber does

Flagship profile

Clean modern lines with a subtle taper
Substantial enough for daily wear, refined enough to dress up
Built to complement a tool watch, not overpower it

It's the strap you leave on.

Specifications


Material	AnchorFlex FKM rubber
Clasp	18mm Precision Deployant, 316L stainless steel (brushed/polished), available as an add-on
Attachment	Machined 316L end links and spring bars included
Length	3-piece: two clasp ends (75mm / 100mm), 105mm hole end
Fits	Wrists 5.25″–8″
Profile	Slim and flexible for all-day wear

FAQs

Some end-link installs can feel tight at first because the thickness rubber strap at the end-link is maximized to ensure durability. There are a few ways to get it installed:

First, try gently wiggling and pushing the spring bar through until the spring bar pops into the opposite side of the end link. This can require some effort.

You can also squeeze the rubber portion of the strap into the end link between your thumb and index finger while pushing the spring bar into place. This helps compress the rubber slightly and gives the spring bar more room to seat properly.

If those techniques do not work, our premium 1.7mm spring bars can be used as an alternative. There is no downside to using them, but we recommend trying the first two installation methods first since the standard spring bars usually work once everything is seated correctly.

If you still have trouble, contact us and we can help troubleshoot the install.

AnchorFLEX™ straps are made from premium FKM rubber and have been third-party tested to be free of harmful fluorinated “forever chemicals” within the scope of the testing performed. We do not intentionally add PFAS-based coatings, surface treatments, or chemical finishes to our straps. Because FKM is a fluorinated rubber, we avoid vague blanket claims and clearly disclose the material. Customers who prefer to avoid fluorinated rubber entirely may prefer our nylon, sailcloth, leather, or other non-FKM strap options.

AnchorFlex™ End-Link Deployant for Omega Speedmaster - Navy Blue